Hoddesdon Transfer
Main - Thames Water (CASE STUDY)
Frazer
& Tabberer were heavily involved alongside Farrans Construction
on the following project.
Customer:
Thames
Water
Contractor
Murphys Pipelines & Subterra
Site
Location
Hoddesdon
Transfer Main M25 NrJunction 25
Date:
April 2001
Canusa sleeves were used on spigot and socket ductile
iron joints Canusa was the easiest way of wrapping the
joints, compared with time-consuming tape wrapping.
In addition, the installation of Canusa is virtually
foolproof with almost no margin of error, and provides
a heat bonded wrap that will not deteriorate or peel off.And
with Canusa being the cheapest product, it was the obvious
choice for the job.
A Thames Water Project Engineer said that they have used
Canusa on many pipelines in the last few years because
the men like using it, installation is quick and easy,
it's not expensive, but provides the best quality protection
available.
Any
information regarding Environmental Aspects or Health & Safety risks
should be directed through the Frazer and Tabberer IMS Systems.
dfrazer@frazerandtabberer.co.uk
Canusa sleeves were used on spigot and socket ductile
iron joints Canusa was the easiest way of wrapping the
joints, compared with time-consuming tape wrapping.